Table of Contents
Advertisement
5
Grip the stop assembly and withdraw the
cartridge from the body.
7
Reassemble the valve in reverse order. Restore the water supplies and check for leaks.
Note: Make sure that the cartridge locates correctly.
Cleaning
Many household cleaners contain abrasives and chemical substances, and should not be used
for cleaning plated or plastic fittings. These finishes should be cleaned with a mild washing
up detergent or soap solution, and then wiped dry using a soft cloth.
Important! The showerhead must be descaled regularly. Keeping the shower spray clean
and free from limescale will ensure that your shower continues to give the best performance.
In-service Tests
The principal means for determining the continuing satisfactory performance of the shower
unit is the in-service test, refer to the TMV2 Requirements Manual.
Frequency of In-service Tests - Commercial (non-domestic installations)
Check for correct blend setting every 6 months.
END VIEW
6
Rinse the cartridge in clean warm water,
removing any dirt or debris.
23
1285246-W2-D
Hide quick links:
Advertisement
Table of Contents
