Installation
Shower Positioning
The shower fittings should be positioned at a convenient height for all the family.
Position the fittings to spray across rather then towards the opening of the cubicle
and also away from the shower control. Avoid layouts where the shower hose will
be sharply kinked. This may reduce the life of the hose.
Critical! The installation area must be carefully prepared and all tiles cut or
drilled accurately for a successful installation.
Note: This product DOES NOT allow for reversed inlets and will deliver dangerously
unstable temperatures if fitted incorrectly. If the tile cutting area exceeds the
boundaries listed (step 6) below, the wall plate may not conceal drilled holes.
1285246-W2-D
To enable sufficient
clearance the valve must
be a minimum 1.1 m
from the ceiling.
Agile ERD+
Offset Valve
to suit
10