Mira Agile S B97C Installation And User Manual page 16

10
Retaining
Screw
Backplate
To prevent the possibility of property
damage / personal injury the retaining
screw MUST be tightened.
DO NOT USE POWER TOOLS TO TIGHTEN
THE RETAINING SCREW
Grease the pipes and push the backplate fully
home onto the wallplate and pipes, taking
care not to damage the seals. Fit and tighten
the retaining screw with the hex key. Tighten
securely.
12
Agile S / S Eco / EV+
DO NOT USE POWER TOOLS TO TIGHTEN THE RETAINING SCREW
Push the valve over the backplate. Tighten the valve body retaining screws with the hexagonal
wrench. Tighten securely.
1285246-W2-D
Orientation markers
always on top
Retaining
Screw
11
Flush the water supplies thoroughly
before connecting the shower unit.
In retrofit installations (where you are
replacing an old valve), remove and discard
the old filters.
Agile ERD+ / Sense ERD+ / Store EV+
16
Retaining
Screw