Mira Agile S B97C Installation And User Manual page 20

3
Lift and adjust the position of the red stopper on back of the handle drive.
Each serration will adjust the temperature approximately 1° C
+ = Warmer
- = Cooler
4
Ensuring correct orientation, "OFF" at
the top, refit the stop assembly and the
retaining screw to the body. Make sure the
stop assembly operates correctly and the
temperature is at the desired level.
1285246-W2-D
Red Stopper
Handle Drive
Cooler
5
Turn the shower off again. Refit the control
lever.
20
Warmer