Names and Functions of Parts
2.1 Analog Input Unit (FP0R-AD4/AD8)
2.1.1 Names and Functions of Parts
Names and Functions of Parts
No.
Name
①
Mode setting
switch
②
Input terminal
for CH0-CH3
③
Input terminal
for CH4-CH7
④
Expansion
connector
⑤
DIN rail installing
groove
⑥
DIN hook
⑦
Expansion hook
2-2
Description
Used for selecting the input range, the number of input channels and whether
to use the averaging processing or not.
Used for selecting the operation mode (12-bit mode or 14-bit mode compatible
with the conventional product FP0-A80).
Used for connecting the analog input device.
Used for connecting the analog input device.
Used for connecting the expansion unit with the internal circuit of the Control Unit.
It can be installed to a 35-mm-wide DIN rail.
The unit can be installed to the DIN rail through one-touch operation.
This hook is also used for installing the unit to the Slim Type Mounting Plate
(AFP0803).
Used for securing expansion units.