Connection Via Dhcp And Gatekeeper - Sony PCS-G70 Integration Manual

3-5. Connection via DHCP and Gatekeeper

Example of system
LAN1
Videoconference terminal A
User name: PCSG70A
User number: 100
When a call is initiated from videoconference terminal A to videoconference terminal B.
1. The LAN Setup menu of videoconference terminal B is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
LAN Mode:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
PPPoE:
PPPoE User Name:
PPPoE Password:
Fixed IP for PPPoE:
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Primary DNS:
Secondary DNS:
NAT Mode:
NAT Address:
Port Number Used:
TCP Port Number:
UDP Port Number:
Hybrid:
TOS:
PCS-G70/G70P
Gatekeeper
DHCP
192.100.10.20
server A
On
Enter any name.
Blank (Cannot be set.)
Blank (Cannot be set.)
Blank (Cannot be set.)
Blank (Cannot be set.)
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode.)
On
192.100.10.20
Enter any name. (Example: PCSG70B)
Enter any number. (Example: 200)
Off
Blank
public
Videoconference Device
Blank
Blank
Off
Blank
Blank
Off
Obtain automatically
Cannot be set.
Cannot be set.
Off
Blank
Default (Set to "Custom" when a port number is specified by the network
administrator.)
2253 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
49152 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
On
Off
Router Router
DHCP
server B
LAN2
Videoconference terminal B
User name: PCSG70B
User number: 200
3-9