Sony PCS-G70 Integration Manual page 60

2. Confirm that the IP address displayed in the launcher menu of videoconference terminal B is
192.100.20.20.
3. Confirm that "Registration Confirm" is displayed at the bottom of page 2 in the LAN Setup menu of
videoconference terminal B.
4. The LAN Setup menu of videoconference terminal A is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
LAN Mode:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
PPPoE:
PPPoE User Name:
PPPoE Password:
Fixed IP for PPPoE:
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Primary DNS:
Secondary DNS:
NAT Mode:
NAT Address:
Port Number Used:
TCP Port Number:
UDP Port Number:
Hybrid:
TOS:
5. Confirm that the IP address displayed in the launcher menu of videoconference terminal A is
192.100.10.10.
6. Confirm that "Registration Confirm" is displayed at the bottom of page 2 in the LAN Setup menu of
videoconference terminal A.
7. Enter LAN in the dial list of videoconference terminal A for a line I/F, user name PCSG70B or user
number 200 of videoconference terminal B in it for an IP address, and other required items. After
that, register videoconference terminal B and initiate a call. Or set LAN for a line I/F and user name
PCSG70B or user number 200 of videoconference terminal B for an IP address by Dial, and then
initiate a call.
3-8
Off
Enter any name.
Local IP address (192.100.10.10)
Depends on a network. Usually, set to 255.255.255.0.
192.100.10.1
Blank
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode.)
On
192.100.10.20
Enter any name. (Example: PCSG70A)
Enter any number. (Example: 100)
Off
Blank
public
Videoconference Device
Blank
Blank
Off
Blank
Blank
Off
Obtain automatically
Cannot be set.
Cannot be set.
Off
Blank
Default (Set to "Custom" when a port number is specified by the network
administrator.)
2253 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
49152 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
On
Off
PCS-G70/G70P