Connection Via Router - Sony PCS-G70 Integration Manual

3-2. Connection via Router

Example of system
LAN1
192.100.10.1
Videoconference
terminal A
192.100.10.10
When a call is initiated from videoconference terminal A to videoconference terminal B.
1. The LAN Setup menu of videoconference terminal B is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
LAN Mode:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
PPPoE:
PPPoE User Name:
PPPoE Password:
Fixed IP for PPPoE:
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Primary DNS:
Secondary DNS:
NAT Mode:
NAT Address:
Port Number Used:
TCP Port Number:
UDP Port Number:
PCS-G70/G70P
VPN
Router
Off
Enter any name.
Local IP address (192.100.20.20)
Depends on a network. Usually, set to 255.255.255.0.
192.100.20.1
Blank
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode.)
Off
Blank
Blank
Blank
Off
Blank
public
Videoconference Device
Blank
Blank
Off
Blank
Blank
Off
Obtain automatically
Cannot be set.
Cannot be set.
Off
Blank
Default (Set to "Custom" when a port number is specified by the network
administrator.)
2253 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
49152 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
192.100.20.1
Router
Videoconference
terminal B
192.100.20.20
LAN2
3-3