Sony PCS-G70 Integration Manual page 15

Video communication system
Table of Contents

Advertisement

7. Enter the telephone number(s) of the ISDN line used
by the system.
When the ISDN unit PCS-B384/B768 or PCSA-
B384S/B768S is used, enter the same number in the
text boxes A1 and A2 for one line (except for the
U.S.A. and Canada).
ISDN Setup Wizard
Area Code
Local Number
A1
A2
B1
B2
C1
C2
Previous
Next
Cancel
Area Code:
Enter the area code.
Do not enter the first “0” of an area code.
Local Number:
Enter the telephone number.
m
. By pressing the PUSH ENTER button with a blank
text box selected, the content in the text box above
will be copied to the selected text box.
. When the ISDN unit PCS-B384 or PCSA-B384S is
used to connect two or three ISDN lines, enter the
telephone numbers in the text boxes B1 to C2.
. When the ISDN unit PCS-B768 or PCSA-B768S is
used to connect two to six ISDN lines, enter the
telephone numbers in the text boxes B1 to F2. To
open the menu with the text boxes D1 to F2, select
“Next” and press the PUSH ENTER button.
. When the ISDN unit PCSA-PRI is used, Ch1 to
Ch23 (T1), or Ch1 to Ch30 (E1) are displayed. Enter
the telephone numbers according to the number of
channels to be used.
ISDN Setup Wizard
Area Code
Local Number
Ch1
Ch2
Ch3
Ch4
Ch5
Ch6
Previous
Next
Cancel
8. Select “Next” using the , , , or
button on the
remote commander, then press the PUSH ENTER
button.
9. Enter the sub-address(es).
Only numeric characters are available for a sub-
address.
When the ISDN unit PCS-B384/B768 or PCSA-
B384S/B768S is used, enter the same number in the
text boxes A1 and A2 for one line.
ISDN Setup Wizard
Sub Address
A1:
A2:
B1:
B2:
C1:
C2:
Previous
Next
Cancel
m
. When the ISDN unit PCS-B384 or PCSA-B384S is
used to connect two or three ISDN lines, enter sub-
addresses in the text boxes B1 to C2.
. When the ISDN unit PCS-B768 or PCSA-B768S is
used to connect two to six ISDN lines, enter sub-
addresses in the text boxes B1 to F2. To open the
menu with the text boxes D1 to F2, select “Next”
and press the PUSH ENTER button.
. When the ISDN unit PCSA-PRI is used, Ch1 to
Ch23 (T1), or Ch1 to Ch30 (E1) are displayed. Enter
the sub-addresses according to the number of
channels to be used.
10. Select “Next” using the , , , or
button on the
remote commander, then press the PUSH ENTER
button.
The LAN Setup Wizard is then displayed.
n
When the LAN is not used, select “Next” and display a
confirmation message. After that, proceed to step 13.
1-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pcs-g70p

Table of Contents