Sony PCS-G70 Integration Manual page 22

Menu Page Item 1
Video Setup 1/1 Video Input
Custom Input 1/1
Label
Monitor Out
General Setup 1/1 Device Setup 1/2
Menu Screens 1/3
1-18
Page Item 2 Description
1/1 Dual Video Select "On" when distributing 2-channel moving picture
simultaneously from the beginning of conference. Select
"Off" when not distributing it.
n
This function is not available in the system version 1.00 to 1.02.
Split Select "Vertical or "Horizontal" when splitting the screen into
two. Select "Off" when not splitting it.
MAIN Select video picture of video input 1.
SUB Select video picture of video input 2.
Main Camera Enter the name when "Main Camera" is selected on the
video input selection window.
Object Enter the name when "Object" is selected on the video input
selection window.
AUX1 Enter the name when "AUX1" is selected on the video input
selection window.
Sub Camera Enter the name when "Sub Camera" is selected on the video
input selection window.
Object Enter the name when "Object" is selected on the video input
selection window.
AUX2 Enter the name when "AUX2" is selected on the video input
selection window.
1/1 Monitors Select the number of monitors connected to the
communication terminal.
Connection Select connectors connecting to the monitors. You can
select them up to the number specified in "Monitors".
Monitor Select "Main" or "Sub" for connected monitors to be used as.
Only one "Main" monitor can be selected. When 1 or 3
monitors are used, VIDEO1 is always "Main" monitor.
Clock Set Set the current date and time.
Terminal Name Enter terminal name to be notified to MCU.
Standby Select "On" when using standby mode. Select "Off" when
Mode not using it.
Standby Set the time (1 to 99 minutes) required until the unit is put
Time into standby mode when standby mode is set to "On".
Last Number Select "On" when registering the remote user in Phone Book
Registration after a conference ends. Select "Off" when not registering it.
Control by Select "On" when receiving camera control command from
Far End the remote party. Select "Off" when not receiving it.
2/2 Language Select language of menu and message displayed on the
screen.
IR Repeater Select mode to put the monitor into standby state or to turn
Mode on power when a Sony's monitor is used. Usually, set to
"MODE 1".
T.120 PC Enter the IP address of computer used when data
Address conference conforming to T.120 is made using NetMeeting.
Time Display Select "On" when displaying elapsed time at upper right of
the screen during conference. Select "Off" when not
displaying it.
Display Select whether to display the connected terminal name on
Terminal Name the screen at the time of disconnection.
Character Select "On" when displaying balloon help appearing when
Input Help entering alphanumeric characters. Select "Off" when not
displaying it.
Default
Off
Off
CAMERA
Not selected
Blank
Blank
Blank
Blank
Blank
Blank
1
VIDEO1
Main
PCS-G70
Off
30
On
On
English
MODE1
Blank
On
Show
temporarily
On
(Continued)
PCS-G70/G70P