System Setting Table - Sony PCS-G70 Integration Manual

1-5-2. System Setting Table

Menu Page Item
Dial Setup 1/2 Line I/F
Bonding
Telephone Mode
More Options Enable
User Name Input
2/2 Prefix
Prefix-A
Prefix-B
Prefix-C
Select LAN Prefix
LAN Prefix
Answer Setup 1/1 Auto Answer
ISDN MSN
Mic on Answer
Reject Answer
Communication 1/3 Individual Setting
Setup
Number of Lines
LAN Bandwidth
2/3 Video Mode
Interlace Mode
4CIF Mode
Video Frame
Audio Mode
Restrict
*1: Setting is added when H.320 or H.323 MCU Software is installed.
*2: In the system version 1.02, these items are automatically set when the Video Mode setting is set to "Auto".
1-16
Description
Select line interface [IP, ISDN, or ISDN (Telephone)] used.
Select bonding mode in which remaining lines can also be
connected by only dialing one line when multiple ISDN lines
are used. Select "On" when connecting a line in the bonding
mode. Select "Auto" when automatically adjusting a line to
remote party.
Select audio compression system during voice meeting.
Set to "On" when you want to set items in the dial setup
menu for each dial list. Set to "Off" when you do not.
Set to "On" when recording user name in communication log
before communication. Set to "Off" when not recording it.
Set prefix number used when connecting using an ISDN line. None
Set ISDN prefix (dial number).
Set "Enabled" when using prefix for connection using a LAN
line. Set "Disabled" when not using it.
Set LAN prefix (dial number).
Select "On" to connect automatically according to a call.
Select "Off" to confirm connection.
Select "On" when using multiple subscriber numbers during
connection (answering) with an ISDN line. Select "Off" when
not using them.
Select "On" to enable microphone when answering a call.
Select "Off" to disable it.
*1 Select "On" to reject connection when a call is received
during conference. Select "Off" to make connection.
Select "On" to set communication mode individually for
dialing, answering, and for multipoint
collectively.
Select the number of ISDN lines used for ISDN
communication from 1B (64 K) up to 30B (1920 K).
Select bandwidth (bit rate) when communicating via a LAN
line.
Select video coding format.
*2
Select "On" when using interlace SIF mode. Select "Off"
when not using it.
*2 Select "On" when using 4CIF mode. Select "Off" when not
using it.
Select maximum number of video transmission frames (15
fps or 30 fps).
Select audio coding format.
Select transmission rate (Auto or 56K) when connecting
using an ISDN line. Two rates (64 Kbps and 56 Kbps) are
used in some countries (USA, etc.) and regions.
Default
IP
Auto
Auto
Off
Off
Blank
Disabled
Blank
On
Off
On
Off
Off
*1 . Select "Off" to set it
30B
1024 Kbps
Auto
On
On
Auto
Auto
Auto
(Continued)
PCS-G70/G70P