Dialing Procedure Of Isdn - Sony PCS-G70 Integration Manual

1-6-1. Dialing Procedure of ISDN

n
It is required that the line number used in the other end is entered in the area code and telephone number
of the ISDN setup menu of the other end. The number of lines used when dialing is determined by the
"Number of Lines" setting in "Communication Setup". The following describes direct-dialing procedure.
Item Operation
1. Select "Line I/F" from the launcher menu
using the , , , buttons on the
remote commander, and press the PUSH
ENTER button. Select "ISDN" from the
setting items using the
press the PUSH ENTER button.
2. Select the number entry field using the
, , buttons on the remote
commander, and press the PUSH ENTER
button.
3. Select "Dial" at the bottom of the menu
using the , , , buttons on the
remote commander and press the Enter
button, or press the CONNECT/
DISCONNECT button on the remote
commander.
4. The remote party answers.
5. Disconnection
Press the CONNECT/DISCONNECT
button on the remote commander.
A confirmation message on whether to
disconnect a line is then displayed.
Select "OK" using or
remote commander, and press the PUSH
ENTER button, or press the CONNECT/
DISCONNECT button again.
1-24
Screen
Tokyo
, buttons, and
New York
Paris
AUTO
Enter the remote party number.
Line type
,
button on the
Phone Book
Detail Dial
History
Menu
IP: 012.345.678.678
Information
ISDN: 012345678956789
Dial
Number text box
Dial
Picture on the
local site
Picture on the
remote site
Meeting starts!
Remarks (Confirmation item)
An ISDN unit (not supplied) must
be connected to the communica-
tion terminal.
"Dialing (ISDN)" is displayed on
the screen, and the ONLINE
indicator (blue) blinks.
The ONLINE indicator (blue)
lights. "Meeting starts!" is
displayed, and the remote party's
voice and image are heard and
displayed from/on the TV monitor.
The line is disconnected and the
videoconference is terminated.
The current display returns to the
launcher menu.
PCS-G70/G70P