Sony PCS-G70 Integration Manual page 25

Menu Page Item 1
LAN Setup 1/1 SNMP
PPPoE
NAT/Port
QoS
PCS-G70/G70P
Page Item 2 Description
1/1 SNMP Mode Select "On" when enabling service of SNMP (Simple
Network Management Protocol) agent. Select "Off" when
disabling it.
Trap Destination Set IP address of SNMP manager that transmits a trap.
Community Set community name that SNMP manager manages.
Usually, set to "public".
Description This is the description of this device. Entered as
"Videoconference Device". This cannot be changed.
Location Set the place where this unit is installed.
Contact Set information on the administrator of this unit.
1/2 PPPoE Select PPPoE termination On/Off using this unit.
PPPoE User Enter PPPoE connection user name (account) acquired
Name from provider.
PPPoE Enter PPPoE connection password acquired from provider.
Password
2/2 Fixed IP for Select "On" when fixed IP address for PPPoE connection is
PPPoE acquired from provider. Select "Off" when automatically
acquiring it for each session.
Fixed IP Address Enter fixed IP address acquired from provider when "Fixed
for PPPoE IP for PPPoE" is "On".
PPPoE DNS Select "Obtain automatically" when acquiring IP address of
DNS server from the server during PPPoE connection.
Select "Specify" when fixed IP address exists.
Primary DNS Enter IP address of primary DNS server when "PPPoE DNS"
is "Specify".
Secondary Enter IP address of secondary DNS server when "PPPoE
DNS DNS" is "Specify".
1/1 NAT Mode Select "On" when connecting this unit to local network using
NAT (Network Address Translation). Select "Off" when not
connecting it.
NAT Address Set IP address on the global side that NAT uses.
Port Number Select whether to fix TCP port number and UDP port number. Default value
Used Custom: The port number that the user sets is used.
Default:
TCP port number 2253 and UDP port number 49152 are set.
TCP Port Set TCP port number when "Port Number Used" is "Custom". 2253
Number
UDP Port Set UDP port number when "Port Number Used" is "Custom". 49152
Number
1/1 Hybrid Select "On" when automatically switching forward error
correction function, packet resend request function, and
adaptive rate control function according to network status.
Select "Off" when not switching them.
Forward Error Select "On" when correcting data by receiver if error is
Correction detected in packets received when "Hybrid" is set to "Off".
Select "Off" when not correcting data.
Packet Select "On" when making a resend request due to packet
Resend loss when "Hybrid" is set to "Off". Select "Off" when not
Request making it.
Adaptive Rate Select "On" when adapting LAN band when "Hybrid",
Control "Forward Error Correction", and "Packet Resend Request"
are set to "Off". Select "Off" when not adapting it.
Default port number is used.
Default
Off
Blank
public
Videoconference
Device
Blank
Blank
Off
Blank
Off
Blank
Blank
Blank
Blank
Off
Blank
On
On
On
On
(Continued)
1-21