Sony PCS-G70 Integration Manual page 56

Hybrid:
TOS:
2. Confirm that the IP address displayed in the launcher menu of videoconference terminal B is
192.100.20.20.
3. The LAN Setup menu of videoconference terminal A is set as described below.
DHCP Mode:
Host Name:
IP Address:
Network Mask:
Gateway Address:
DNS Address:
LAN Mode:
Gatekeeper Mode:
Gatekeeper Address:
User Alias:
User Number:
SNMP Mode:
Trap Destination:
Community:
Description:
Location:
Contact:
PPPoE:
PPPoE User Name:
PPPoE Password:
Fixed IP for PPPoE:
Fixed IP Address for PPPoE: Blank
PPPoE DNS:
Primary DNS:
Secondary DNS:
NAT Mode:
NAT Address:
Port Number Used:
TCP Port Number:
UDP Port Number:
Hybrid:
TOS:
4. Confirm that the IP address displayed in the launcher menu of videoconference terminal A is
192.100.10.10.
5. Enter LAN in the phone book of videoconference terminal A for a line I/F, IP address 192.100.20.20
of videoconference terminal B in it for an IP address, and other required items. After that, register
videoconference terminal B in the phone book and initiate a call. Or set LAN for a line I/F and IP
address 192.100.20.20 of videoconference terminal B for an IP address by Dial, and then initiate a
call.
3-4
On
Off
Off
Enter any name.
Local IP address (192.100.10.10)
Depends on a network. Usually, set to 255.255.255.0.
192.100.10.1
Blank
Auto Nagotiation (This mode is changed to a proper mode when mismatching
occurs in the mode.)
Off
Blank
Blank
Blank
Off
Blank
public
Videoconference Device
Blank
Blank
Off
Blank
Blank
Off
Obtain automatically
Cannot be set.
Cannot be set.
Off
Blank
Default (Set to "Custom" when a port number is specified by the network
administrator.)
2253 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
49152 (Enter the port number specified by the network administrator when
the port number used is set to "Custom".)
On
Off
PCS-G70/G70P