Workbench Help; Drive Setup Screens - Kollmorgen AKD-P01206-NBEC-0000 Training Manual

WorkBench Help

Within WorkBench is provided quick access to the help screens.
accessed using the Help tab, or the F1 key. If the Help tab is used the search screen
within Help will allow you search on a specific topic.
DRV.ACTIVE was made returning 14 results.
Using the F1 key can take the user to a specific section by clicking on the screen, or
within a specific parameter to narrow the search. For example, from the Motor screen
and clicking in the Motor Poles then F1 brings up the Help screen specific to
MOTOR.POLES, the parameter name.
Another helpful feature is using the Right Click in
the parameter box. A drop down box will appear
in which is the selection, "Parameter Info" is
available. When this is click a box with a brief
description about parameter will appear. At times
this is enough information to help complete the
current setup task.

Drive Setup Screens

Drive Overview
Settings
Motor
•
• Feedback 1
Feedback 2
•
Brake
•
In the example a search of
At this point all the general information about
this parameter is displayed.
important information displayed is Type of
parameter, Units, Range, and Data Type.
Also include is the Variants Supported which
is helpful if the parameter is to be changed in
other drive types. The Fieldbus Information
provides the format and for this parameter in
EtherCAT COE, CANopen, and Modbus. A
detailed description of the parameter is also
provided as well as Related Topics.
Units
•
• Modulo
Limits
•
Home
•
These can be
Some of the
10