PARALLEL REMOTE connector
Used for future expansion. It is currently
unavailable.
SDI 2 IN (SDI 2 input) connectors (BNC)
Input connectors for serial digital signals.
For details, see "Connecting the SDI Signals"
(page 14).
Note
When the 12G-SDI or 6G-SDI signal is input to the
SDI 2 IN connectors, the 12G-SDI cable (L-
5.5CUHD manufactured by Canare Electric Co.,
Ltd. or an equivalent cable) is recommended.
SDI 2 OUT (SDI 2 output) connectors (BNC)
Output connectors for serial digital signals.
Connecting the SDI Signals
The following signals can be input to the SDI 1 IN and SDI 2 IN connectors of this unit.
Input signal
Single Link
3G/HD-SDI
12G/6G-SDI
Dual Link
3G/HD-SDI
Quad Link
(2-sample interleave
3G/HD-SDI
division)
Quad Link
3G/HD-SDI
(Square division)
-
-
3G/HD-SDI Link 1
3G/HD-SDI Link 2
3G/HD-SDI Link 1
3G/HD-SDI Link 2
3G-SDI Link 1
3G-SDI Link 2
3G-SDI Link 3
3G-SDI Link 4
Mapping signal of Sub image 1 (upper-left screen)
Mapping signal of Sub image 2 (upper-right screen)
Mapping signal of Sub image 3 (lower-left screen)
Mapping signal of Sub image 4 (lower-right screen)
14
The to connectors output the signal that is
input to the corresponding SDI 2 IN connector.
Notes
SDI output is not activated when the unit is
turned off.
When the 12G-SDI or 6G-SDI signal is output
from the SDI 2 OUT connectors, the 12G-SDI
cable (L-5.5CUHD manufactured by Canare
Electric Co., Ltd. or an equivalent cable) is
recommended.
AC IN socket
Connect the supplied AC power cord.
Main power switch
Press to provide power supply to the unit.
SDI 1 IN
1 to 4
Connector
Maximum
SDI 2 IN
1 to 4
8 channels
-
1, 3
2 channels
1
1
2
2
4 channels
3
3
4
4
1
1
2
2
2 channels
3
3
4
4
1
1
2
2
2 channels
3
3
4
4