Sony TRIMASTER HX BVM-HX310 Operating Instructions Manual page 9

protective function for the LCD panel activates. Keep the
temperature of the peripheral environment of the unit
around 25 °C (77 °F) to avoid brightness decrease due to the
protection function. For the installation environment of the
unit, see "On Installation" (page 3).
For details on the HDR (High Dynamic Range) display, see
"On High Brightness Display" (page 4).
About operations using the Sony monitor control
unit (the controller)
When the optional controller (BKM-16R or BKM-
17R) is connected, the following operations are
available with the buttons of the controller.
For details on each function, see "Adjustment
Using the Menus" (page 18).
Menu operation buttons
Button Operations
MENU button When the on-screen menu is not
displayed, press the button to display
the menu. Press again to clear the
menu.
When the menu is displayed, press the
button to reset the value of an item to
the previous value.
ENTER button When the menu is displayed, press the
button to confirm a menu item or
setting value.
However, displaying the signal format
by pressing and holding the button is
not available.
UP button When the menu is displayed, press the
DOWN button button to select a menu item or setting
value.
Power button
Button Operations
MONITOR Switches the operating mode of the
switch monitor.
Press the button for the sleep mode
when the monitor is in the operating
mode. The power indicator on the
front panel lights in red.
Press the button for the operating
mode when the monitor is in the sleep
mode.
Rotary encoder/MANUAL buttons
Knob Operations
CONTRAST knob Adjusts the picture contrast.
BRIGHT knob Adjusts the picture brightness.
CHROMA knob Adjusts the color intensity.
PHASE knob Available only in the color temperature
adjusting menu.
No other operations are available.
Button Operations
CONTRAST MANUAL Press the button to adjust contrast
button manually.
BRIGHT MANUAL Press the button to adjust brightness
button manually.
CHROMA MANUAL Press the button to adjust color
button intensity manually.
PHASE MANUAL Available only in the color temperature
button adjusting menu.
No other operations are available.
Numeric buttons
Button Operations
1 to 9 button Turns on or off functions assigned to
the numeric buttons from 1 to 9 on the
controller.
The factory default settings are
following:
1 button: SDI1 4K
2 button: SDI1 2K
3 button: SDI2 4K
4 button: SDI2 2K
5 button: HDMI
6 button: Native Scan
7 button: Internal Signal
8 button: Internal Signal Pattern
9 button: Marker
Each function can be assigned at
"Function/Numeric Button Setting"
(page 37) of the "Serial Remote" menu.
Ent button Operates similar to the ENTER button
on the controller.
Function buttons
Button Operations
F1 to F16 button Turns on or off functions assigned to
the function buttons on the controller.
The following functions are available.
Mono, Blue Only, R Off, G Off, B Off,
Character Off, Native Scan, Interlace,
Aperture (selecting the manually
adjusted setting in Aperture), Marker,
Aspect Marker, Area Marker1, Area
Marker2, Center Marker, Aspect
Marker-Line, Aspect Blanking-Black,
Aspect Blanking-Half
Note
Up to a total of three controller units (including
BKM-16R and BKM-17R) can be simultaneously
connected to a BVM-HX310 unit.
9