The menu disappears automatically if a button is
not pressed for one minute.
About the memory of the settings
The settings are automatically stored in the
Protection of the Setting
Protecting the setting values using the
KEY INHIBIT button
You can protect the setting values using the KEY
INHIBIT button (page 7).
When the values are protected by the key inhibit
function, you cannot change the values.
To change the values, press and hold the KEY
INHIBIT button for more than two seconds to set
the protection of the setting value to off.
Protecting the setting values using
You can protect the setting values of the color
temperature for "User1" and the User Preset for
"User Preset1" using "Password Lock."
When the values are protected with a password,
you need to enter the password during the
When you change the color temperature
values for "User1" using "Adjust Gain/Bias" or
When you change the User Preset values for
For details, see "Password Lock" (page 38).