Table of Contents
Advertisement
Submenu
Setting
RGB Range
When "RGB/YCC Range Auto" is set to
"Off" and the signal is RGB, select from
the following:
Full: 0 to 1023 (10bit) / 0 to 4095
Limited: 64 to 940 (10bit) / 256 to
YCC Range
When "RGB/YCC Range Auto" is set to
"Off" and the signal is YCbCr, select
from the following:
Full: 0 to 1023 (10bit) / 0 to 4095
Limited: 64 to 940 (10bit) / 256 to
Col. Space/Mtx.
Select how to set the color space and
Auto
transfer matrix.
On: Use the color space and transfer
Off: Use the color space and transfer
Color Space
Select the color space from the
following when "Col. Space/Mtx. Auto"
is set to "Off."
ITU-R BT.709
EBU
SMPTE-C
Native
S-Gamut/S-Gamut3
S-Gamut3.Cine
DCI-P3
ITU-R BT.2020
1) Displays with the unit's color space
of the three primary color
chromaticity points. This is the
widest color space setting which the
unit can reproduce.
Transfer Matrix
Select the transfer matrix from the
following when "Col. Space/Mtx. Auto"
is set to "Off."
ITU-R BT.709
ITU-R BT.2020
Set the following depending on the
"Color Space" setting.
When "ITU-R BT.2020" is selected:
Select ITU-R BT.2020.
When "ITU-R BT.709" is selected:
Select ITU-R BT.709.
When another item is selected: Select
the transfer matrix setting of the
device which outputs the signal.
(12bit)
3760 (12bit)
(12bit)
3760 (12bit) (Default value)
matrix according to the input
signal information.
matrix that was set in the menu.
1)
Submenu
Setting
EOTF
Select the gamma from the following:
When "ITU-R BT.2100(HLG)" is selected
User Preset
Select the User Preset data to be
applied.
When the XYZ format signal is input,
set to "User Preset XYZ."
Copy From
Copy another input setting data to the
selected input setting.
Input Setting Skip
Sets the skip setting when changing
the input setting with Input select
buttons (page 7) or the controller.
Select "Skip"/"Not Skip" for each input
setting of "Input Setting1" to "Input
Setting8."
When "Not Skip" is selected, the input
setting changes in sequential order
every time Input select buttons are
pressed.
28
2.2
2.4
2.6
CRT
2.4(HDR)
S-Log3(HDR)
S-Log2(HDR)
SMPTE ST 2084(HDR)
ITU-R BT.2100(HLG)
S-Log3(Live HDR)
HLG System Gamma: Sets the
system gamma of the HLG. Set
from 1.000 to 1.500. (Default
value: 1.200)
User Preset1 (Default value)
User Preset2
User Preset3
User Preset4
User Preset5
User Preset XYZ
Note
Input Setting1 (Default value)
Input Setting2
Input Setting3
Input Setting4
Input Setting5
Input Setting6
Input Setting7
Input Setting8
Skip: Skips.
Not Skip: Does not skip.
Hide quick links:
Advertisement
Table of Contents
