Air Supply - Graco ProMix PD2K Installation Manual

Air Supply

Air Supply Supply
Air Air Supply
Air Requirements Requirements
Air Air Requirements
• Compressed Compressed air Compressed air supply air supply pressure: supply
(0.6–0.7 MPa, 6.0-7.0 bar).
Air hoses: hoses: use grounded hoses that are correctly
• Air Air hoses:
sized for your system.
Trapped air can cause a pump or dispense
valve to cycle unexpectedly, which could result
in serious injury from splashing or moving parts.
Use bleed-type shutoff valves.
• Air Air regulator Air regulator regulator and and bleed-type and bleed-type shutoff bleed-type
in each air line to fluid supply equipment. Install
an additional shutoff valve upstream of all air line
accessories to isolate them for servicing.
32
pressure: 85-100 psi pressure:
shutoff valve: shutoff valve: include valve:
To reduce the risk of fire and explosion if using
a Graco electrostatic gun, a shutoff valve must
be installed in the gun air line to shutoff the
atomizing and turbine air to the gun. Contact
your Graco distributor for information on air
shutoff valves for electrostatic applications.
• Air Air Air Line Line Filter Line Filter for Filter for System for System Control System
air regulator/filter 17M842 to provide clean and dry
air to system control solenoids.
• Air Air Air Line Line Filter Line Filter for Filter for Atomizing for Atomizing Air: Atomizing
to filter oil and water out of the air supply and help
avoid paint contamination.
See Technical Data, page
requirements.
Control Air: Control Air: Use supplied Air:
Air: Provided by others Air:
60, for air filtration
332457M