Select Mixing Option - Graco ProMix PD2K Installation Manual

Configuring Your System
3. 3. 3. Select Select Mixing Mixing Option
Select Mixing
The system will use either a Mix-at-Belt Manifold or
a Wall Mounted Mix Manifold. The PD3K+ system
may use more than one manifold, which might be a
3a. 3a. 3a. Mix Mix At At At Belt Mix Belt Using Belt Using Mix Using
The following mix manifold kits are available. The mix
manifolds attach to the painter's belt, allowing mixing
to occur at the point of spray. See the ProMix Mix
Mix Manifold Mix Mix Manifold Manifold Description Description Description
24R991 Low pressure mix manifold
24R992 High pressure mix manifold
24T273
High pressure mix manifold, acid-compatible materials
3b. Mix Mix At At At Wall Wall Using Using Remote
3b. 3b. Mix Wall Using
The following remote mix manifold kits are
available. The mix manifolds may be attached to
the wall, in the hazardous area, allowing mixing to
Mix Mix Manifold Mix Manifold Manifold Description Description Description
25D543 Low Pressure Remote Mix Manifold
25D605 High Pressure Remote Mix Manifold
26C288 Three-port Low Pressure Remote Mix Manifold
NOTE: NOTE: This configuration will require installation NOTE:
of a second solvent flow switch kit (24T787), sold
separately. A Dual Panel system will require two
solvent flow switch kits. A PD3K+ system will require
an additional flow switch kit for components C and
D, if applicable.
System System System
ProMix PD
MCx000
ProMix Dual Mix
MCx002
PD3K Upgrade Kit
26C416
24
Option
Option
Mix Manifold Mix Manifold Manifold
Remote Mix Mix Manifold Manifold
Remote Mix Manifold
# # # of of of Solvent Solvent Solvent Flow Flow Switches Flow Switches Switches
Included
Included Included
1
2 (one for each Mix Unit)
1
combination of manifold types, and/or a Three-port
Wall Mounted Manifold. A Mix-at-Belt Manifold may
only be used for the final mixing stage because it
requires user interaction to go between spray and
flush.
Manifold Kit manual in
further information.
Maximum Maximum Maximum Fluid
300 psi (2.1 MPa, 21 bar)
1500 psi (10.5 MPa, 105 bar)
1500 psi (10.5 MPa, 105 bar)
occur close to the point of spray. See the Color
Change and Remote Mix Manifold Kits manual in
Related Manuals, page 2
Maximum Maximum Fluid Maximum
300 psi (2.1 Mpa, 21 bar)
1500 psi (10.5 Mpa, 105 bar)
300 psi (2.1 MPa, 21 bar)
NOTE: NOTE: The 26C288 manifold is only used with NOTE:
the ProMix PD3K+ system. Additional flow switch
kits (24T787) may be necessary for additional
components that need to be installed.
Manifold Manifold Manifold Selection Selection Selection Additional Solvent Additional Additional
Mix-at-Belt
Mix-at-Wall
Mix-at-Belt
Mix-at-Wall
Mix-at-Belt and
Mix-at-Wall
(2) Mix-at-Wall
Three-port
Related Manuals, page 2
Fluid Working Fluid Working Pressure Working Pressure Pressure
, for more information.
Fluid Working Fluid Working Pressure Working Pressure Pressure
Solvent Flow Solvent Flow Switch Flow Switch Switch
Kits (24T787) (24T787) Required Required
Kits Kits (24T787) Required
NONE
1
NONE
2 (one for each Mix Unit)
1
332457M
, for