Xs814 Auxiliary Terminal Package; Cross Connectors; Xal10 Swivel Label Holders; Xs816 Bridge Connectors - Honeywell Excel 800 LION Installation And Commissioning Instructions

Excel 800 LION

XS814 Auxiliary Terminal Package

Features
• Type: XS814 Auxiliary Terminal Package
• For mounting onto already installed I/O modules in order
to equip them with additional terminals.
• Each unit consists of 2 terminal blocks (the "A" block and
the "B" block), each with 7 terminals with a maximum
load of 12 A.
Fig. 85 XS814 Auxiliary Terminal Package
Terminal Assignment
A1 A2 A3 A4 A5 A6 A7
1 2 3 4 5 6 7
Fig. 86 Terminal assignment and internal connections of
XS814 Auxiliary Terminal Package
B1 B2 B3 B4 B5 B6 B7
1 2 3 4 5 6 7
61

Cross Connectors

XS815 Cross Connector Features
• For connecting the common terminals of all 6 relays.
This is permitted when all terminal blocks carry the same
voltage
• Long, red
• Supplied with the terminal socket
Fig. 87 XS815 Cross Connector
XS817 Cross Connector Features
• For connecting the common terminals of only relays 1–3
or of relays 4–6
• Short, yellow
• Must be ordered separately
Fig. 88 XS817 Cross Connector

XAL10 Swivel Label Holders

• Type: XAL10 Swivel Label Holder
• For applying self-adhesive labels with application
information generated using CARE
• For use with standard commercially-available labels,
e.g., AVERY ZWECKFORM 3669
• Supplied with the terminal socket

XS816 Bridge Connectors

• Type: XS816 Bridge Connectors
• Bridge connectors transmit both communication signals
and power supply between modules
• Supplied with the terminal socket
EN1B-0375GE51 R0308