Wiring And Setting Up The System; General Safety Considerations; Wiring Push-In Terminals - Honeywell Excel 800 LION Installation And Commissioning Instructions

Excel 800 LION

Wiring and Setting Up the System

General Safety Considerations

• When connecting the CLLIONLC01 Controller Module or
Excel 800 LION I/O modules, both VDE, National Electric
Code (NEC) or equivalent, and any local regulations
concerning grounding and zero voltage must be
observed.
• Electrical work should be carried out by a qualified
electrician.
• The electrical connections must be made at the terminal
blocks. The corresponding connection diagrams are
located on the individual controller module and
I/O modules.
• For Europe only: To comply with CE requirements,
devices with a voltage in the range of 50 ... 1000 VAC or
75 ... 1500 VDC, which are not provided with a supply
cord and plug or with other means for disconnection from
the supply having a contact separation of at least 3 mm
in all poles, must have the means for disconnection
incorporated in the fixed wiring.
WARNING
Risk of electric shock or equipment damage!
Do not touch any live parts in the cabinet.
►
Disconnect the power supply before making connections
►
to or removing connections from terminals of controller or
I/O modules.
Do not use spare terminals as wiring support points.
►
Do not reconnect the power supply until you have
►
completed the installation.
Observe precautions for handling electrostatic sensitive
►
devices.

Wiring Push-in Terminals

The Excel 800 LION System is equipped with push-in
terminals for easy wiring.
For correct wiring, cables must fulfill the following
specifications according to IEC664-1 / VDE 0110 (4.97):
Max. plug gauge
Solid conductor H05/07) V-U
Stranded conductor H05(07) V-K
Stranded conductor with wire end
ferrules (without plastic collar)
Stripping length
Table 22 Push-in terminals wiring specifications
23
2
0.14 ... 1.50 mm
2
0.25 ... 1.50 mm
2
0.25 ... 1.50 mm
2
0.25 ... 1.50 mm
8.0 +1.0 mm
EN1B-0375GE51 R0308