C-Bus Tx Led And Rx Led; Reset Button - Honeywell Excel 800 LION Installation And Commissioning Instructions

Excel 800 LION

C-Bus Tx LED and Rx LED

The CLLIONLC01 Controller Module is equipped with a Tx
LED (status: yellow/OFF) and an Rx LED (status:
yellow/OFF).
Fig. 50 C-Bus Tx LED (1) and Rx LED (2)
C-Bus LEDs
Tx (1) The controller is sending data onto the
flickering C-Bus
Rx (2)
The controller is receiving data from the
flickering C-Bus
Table 29 Controller C-Bus LEDs

Reset Button

The CLLIONLC01 Controller Module is equipped with a
reset button.
Fig. 51 Reset button (1)
Pushing the reset button (1), e.g. using a paperclip, will
cause the CLLIONLC01 Controller Module to reset.
Note
In the event of a reset, all non-volatile memory contents are
permanently deleted, though the clock will not be set to
zero.
In order to avoid problems, we therefore recommend that
you always save your application changes (e.g., time
C-Bus
1 2
RESET
1
35
program changes) to FLASH memory.
EN1B-0375GE51 R0308