Accessories; Xs830 Auxiliary Terminal Package; Xs831 Auxiliary Terminal Package; Xs816 Bridge Connectors - Honeywell ComfortPoint Open Installation And Commissioning Instructions

TM
ComfortPoint Open System

Accessories

XS830 Auxiliary Terminal Package

Features
• For mounting onto the top of already-installed CPO-
IO830A modules in order to equip them with additional
terminals.
• Each unit consists of two groups of terminal blocks
(the "A" block and the "B" block), each with nine internally-
connected push-in terminals with a maximum load of 12 A.
A1 A2 A3 A4 A5 A6 A7 A8 A9
Fig. 12. XS830 Auxiliary Terminal Package
Terminal Assignment
A1 A2 A3 A4 A5 A6 A7 A8 A9
1 2 3 4 5 6 7 8 9
Fig. 13. Terminal assignment and internal connections of
XS830 Auxiliary Terminal Package

XS831 Auxiliary Terminal Package

Features
• For mounting onto the top of already-installed CPO-
IO830A modules in order to equip them with additional
terminals.
• Two groups of four pairs of push-in terminals (A1B1, A2B2,
... A8B8, each with a 499Ω resistor) for converting
0...20 mA signals (maximum load per resistor = 25 mA)
into 0...10 Vdc signals, and one push-in ground terminal
per group. See also Fig. 10 and Fig. 11.
NOTE: The ground side of each of the eight incoming
0...20 mA signals (A1B1, A2B2, ... A8B8) must be
connected to a ground terminal.
A1 B1 A2 B2 A3 B3 A4 B4 G1
Fig. 14. XS831 Auxiliary Terminal Package
B1 B2 B3 B4 B5 B6 B7 B8 B9
B1 B2 B3 B4 B5 B6 B7 B8 B9
1 2 3 4 5 6 7 8 9
A5 B5 A6 B6 A7 B7 A8 B8
Terminal Assignment
A1 B1 A2 B2 A3 B3 A4 B4 G1
1 2 3 4 5
Fig. 15. Terminal assignment and internal connections of
XS831 Auxiliary Terminal Package

XS816 Bridge Connectors

• Bridge connectors transmit both communication signals
and power supply between Panel Bus I/O modules.
• Supplied with the terminal socket / CPO-IO830A.
G2
11
A5 B5 A6 B6 A7
6 7 8 9 1 2 3 4
EN1B-0498GE51 R0512
B7 A8 B8 G2
5 6 7 8 9