Type 1 Installation Into Victorian/Federation Grate - Real Flame Magiglo Series Installation & Operating Manual

TYPE 1 INSTALLATION INTO VICTORIAN/FEDERATION GRATE

• Minimum insert depth shall be 180mm.
• Maximum insert opening height shall be 675mm.
CUT OUT
SECTION
BASE GRATE
OFF
EDWARDIAN/VICTORIAN
GRATE
COAL PLACEMENT
Place Air Tubes 5mm behind Burner Port and
space evenly. (cut to size if too long).
AIR TUBES
5mm GAP
Place base layer of coals as above and
randomly stack remainder allowing for gaps.
CONTROLS ON UNDER SIDE OF BASE GRATE
IMPORTANT:
ALL AIR GAPS ON THE
UNDERSIDE OF THE BASE GRATE
MUST BE SEALED
AIR TUBES
COALS
CERAMIC
BLANKET
BURNER
PORT
CONTROL
FRONT IRON
BURNER
BURNER
PORT
HOUSING
15