Inbuilt Model Installation Diagrams - Real Flame Heatseeker Series Installation & Operating Manual

HEATSEEKER INBUILT MODEL
• Unit installed into an existing "working" fireplace requires an AGA approved 225mm gas
cowl and chimney plate fixed to the chimney top.
• If the fireplace is not a "working" fireplace, then the applicable flue to the model being
installed should be installed using a gather, single skin flue and AGA approved gas cowl.
• If the flue is to be exposed, or enclosed with any combustible material, the appropriate
approved twin skin flue and gas cowl is required.
• For Type 1 installations models with an ODS pilot must be used.
Overall Dimensions (in mm)
MODEL
600
850
1000
A B C
730 370 605
980 370 605
1130 370 605
D E F
610 370 740
860 370 990
1005 370 1140
OFF O O F OFF
G H I
670 75 15
670 75 15
670 75 15
7