Danfoss FC 300 Profibus Manual page 53

FC 300 Profibus
Fault Interpretation
no.
0 Illegal PNU
1 Parameter value cannot be changed
2 Upper or lower limit exceeded
3 Subindex corrupted
4 No array
5 Data type false
6 Cannot be set by user (reset only)
7 Description element cannot be changed
8 IR required PPO-write not available
9 Description data not available
10 Access group
11 No parameter write access
12 Key word missing
13 Text in cyclical transmission not readable
14 Name in cyclical transmission not readable
15 Text array not available
16 PPO-write missing
17 Request temporarily rejected
18 Other fault
19 Data in cyclical transmission not readable
130 There is no bus access to the parameter
called
131 Data change is not possible because factory
setup has been selected
How to Access FC 300 Parameters
MG.33.C2.02 - VLT is a registered Danfoss trademark
53