EM TEST compact NX5 Series Operation Manual page 48

EM TEST
4.3.4.1. Run Window Menu
The run Window Menu offers the following functions. The most functions are available in all phenomenon.
View Run Information
Run log table where all parameter changes and events
during the test are logged.
Save Report
Save the report to
- Ext. USB Stick as a *.pdf file
- Ext. USB Stick as a *.rtf file
- Internal in the device as *.rpt file
Save Run Information
Saves the run information internal to the device
as log file. The file can be export in the main menu
Configuration
Trigger- and Monitor configuration
Peak Limitter
Setting of Peak current Limitter
4.3.4.2. Run Window at test end
After running a test, the VIEW RUN INFORMATION shows all run information during the test. The list shows:
- The actual date and time of the event
- All parameter settings and their changes
- Measurements like peak voltage or peak current
- Events like Mark, Fail and breaks
A Filter separates the log table by: All, Break, Mark, Fail and Mark & Fail
Operating Manual V 1.06
Compact NX5
48 / 143