EM TEST compact NX5 Series Operation Manual page 2

EM TEST
Exclusion for Documentation
Unless specifically agreed to in writing, AMETEK Compliance Test Solutions (AMETEK CTS):
(a) Makes no warranty as to the accuracy, sufficiency or suitability of any technical or other information provided
in its manuals or other documentation.
(b) Assumes no responsibility or liability for losses, damages, cost or expenses, whether special, direct, indirect,
consequential or incidental, which might arise out of the use of such information. The use of any such
information will be entirely at the user's risk, and
(c) Reminds you that if this manual is in any language other than English, although steps have been taken to
maintain the accuracy of the translation, the accuracy cannot be guaranteed. Approved AMETEK content is
contained with English language version.
The present manual shows suggestions of test setups according to the standards IEC 61000-4-x using
equipment manufactured by EM TEST.
The suggestions do certainly not replace the standards! Variations due to different interpretations of the standard
are possible. The circuits shown in the figures supposed to illustrate the functional principles only and do not
show every single detail of the components.
Manual information
Version / date:
Replaces:
Filename:
Printdate:
Contact Information
EM Test (Switzerland) GmbH
Sternenhofstrasse 15
4153 Reinach BL1
Switzerland
Phone : +41 61 717 91 91
Fax : +41 61 717 91 99
URL : http://www.emtest.com
Copyright © 2017 EM Test (Switzerland) GmbH
Operating Manual
1.06 / 10.01.2017
1.05 / 30.09.2016
UserManual-compact-NX 5-E-V1.06.doc
10.01.17
All right reserved.
Information in earlier versions. Specifications subject to change
V 1.06
Compact NX5
2 / 143