EM TEST compact NX5 Series Operation Manual page 26

Ultra-compact simulator and its system modules
Table of Contents

Advertisement

EM TEST
3. Press INSTALL for start the update
procedure. The update process is shown
on the screen.
Press CANCEL for exit
4. After display Update successfully done,
remove the USB Sticks when indicated
A counter will indicate that the device will
reboot after 10 seconds
6. If you get the following message after
rebooting,
a. Click OK,
b. Continue with step 7 to 12 for the
Phenomenon Firmware update to
complete.
c. Then continue with the following steps:
- Save the settings on an USB Stick
- Proceed the SysOP upgrade
- Import the saved settings from the
USB stick
7. After switch on,
DO not switch OFF while updating
After the update the system is loading the
devices
Operating Manual
updating
System reboot
V 1.06
Compact NX5
26 / 143

Advertisement

Table of Contents
loading

Table of Contents