Installation Of The Compact Nx5 System; Unpacking - EM TEST compact NX5 Series Operation Manual

EM TEST
3.2.

Installation of the compact NX5 system

3.2.1.

Unpacking

Check the packaging for signs of damage in transit. Any damage should be reported immediately to the
transportation company and the local representative.
Lift the compact NX5 test system out of its packaging. Place the test system so that there is sufficient free space
around the cooling air inlets on both sides and behind the fan outlet on the rear panel.
NOTE
Do not dispose of packaging materials. All packaging should be retained in the event that the instrument or any
of its accessories should need to be returned to a EM TEST service center for repair or calibration.
Using the following list, check that all the items ordered have been delivered:
Item Name
1 Compaxt NX5
2 Power Mains cable
3 ESC
4 ESA1
5 SCC AD
6 SWL AD
7 Ethernet cable
8 Cleaning tissue
Safety Manual
9
10 Quick Start Guide
11 USB Memory card
12 User Manual
13 Iec.control Software
14 Software license
Operating Manual
Remark
Compact NX5 generator including
- Single phase coupling network 300 V / 16 A
Including ordered Modules
- Burst Module
- Surge Module
- Power Fail Module
- Telecom Surge Module
Power Mains cable
- Connectors country coded
EUT Supply Cable
- Connectors country coded
EUT Supply Adapter
- Connectors country coded
Safety Circuit Adapter (Sys. Link)
Short circuit for Interlock
Warning Lamp Adapter
Ethernet crossover network cable
RJ45, Cat 6, SF/UTP, red
Safety Manual
200 / 500 /NX Series
Quick Start Guide
Compaxt NX – English or German
Files on USB Memory card
User manual (pdf on the memory card)
Software iec.control, (on the memory card)
If ordered on a license sheet
- UOC Optolink Converter USB to LWL
- Optical fiber cable 5m
V 1.06
Compact NX5
Picture
12 / 143