1 General data
1.7 Further use of Sirona Dental CAD/CAM System
20XX
14
Further use of Sirona Dental CAD/CAM System
1.7
The Sirona Dental CAD/CAM System is also an optical impression
system for computer assisted design and manufacturing (CAD/CAM)
according to 21 CFR 872.3661.The system records the topographical
characteristics of teeth, dental impressions, or stone models for use in
the computer-assisted design and manufacturing of dental restorative
prosthetic devices. Such devices are exempt from the premarket
notification procedures.
1.8
Legend
Year of manufacture
"Hot surface" symbol
Product disposal symbol (see "Disposal [→ 85]").
Storage battery pack recycling symbol (see "Disposal of the storage
battery pack [→ 86]")
The CEREC Omnicam AC / Omnicam AC acquisition unit may con-
tain an RF transmitter in the form of a WLAN card or a separate wire-
less module.
Radio approval for Australia/New Zealand
Follow the operating instructions.
To ensure safe operation of the unit, the user must follow the operat-
ing instructions.
Operating Instructions CEREC Omnicam AC / Omnicam AC
D3696.201.02.03.02 05.2019
Dentsply Sirona
66 54 656 D3696