Section 5
MAINTENANCE
Change the oil in the drive axle
NOTE: On other axle versions drain and filler
plugs are of slightly different design�
Perform the oil change accordingly�
drain oil only at operating temperature�
Environment
Catch old oil and dispose of environmentally�
Fig. 129
Clean and unscrew all level inspection and drain
•
plugs (Fig. 129).
Drain and catch all oil.
•
Clean the drain plug and turn it back in with a
•
new seal ring.
5-30
Fig. 130
Fill in oil through the oil level inspection bores
•
(Fig. 130), until it has reached the bottom edge of
the bore.
For quality and quantity of oil refer to the table of
fuels and lubricants�
Retighten the filler and level inspection plug.
•
4-2012