Working On The Fuel System - Fayat Group BOMAG BW177D-50 Operating Instructions, Maintenance Instructions

Section 2
SAFTEY REGULATIONS
Do not let acid come in contact with skin and clothes.
If being injured by acid flush off with clear water and
seek for medical advice.
Metal objects (e.g. tools, rings, wrist watches) must
not contact the battery poles - danger of short circuit
and burns!
When recharging maintenance free batteries remove
the plugs to avoid the accumulation of explosive gases.
When using an external battery to start the machine
follow the respective instructions.
Dispose of old batteries environmentally.
Switch the charging current off before removing the
charge clamps.
Ensure good ventilation, especially when charging the
battery in a closed room.

working on the fuel system

Do not inhale fuel fumes.
No open fire, do not smoke, do not spill any fuel.
Catch running out fuel, do not let it seep into the ground
and dispose of environmentally.
working on wheels and tires
Explosion like bursting of tires and parts of rims and
tires can cause severe or even deadly injuries.
The assembly of tires must only be carried out
by experienced personnel and with the correct
equipment. If necessary have the tires assembled in
a qualified workshop.
Ensure correct tire pressure and do not exceed the
highest specified pressure.
Check wheels and tires every day for specified pressure,
cuts, bulges, damaged wheel rims, missing wheel studs
and nuts. Do not drive with damaged tires or wheels.
Anti-stick emulsions for tires must only be mixed using
water and concentrated anti-stick agent according to
the specifications of the manufacturer of the anti-stick
agent. Observe the regulations for the protection of
the environment.
2-8
cleaning
Do not clean the machine while the engine is running.
Do not use gasoline or other combustible substances
for cleaning purposes.
When using steam cleaning equipment do not subject
electrical components and insulating materials to the
direct water jet, but cover them beforehand.
Do not guide the water jet into the exhaust or
•
into the air filter.
After maintenance work
Reinstall all protective devices after completing the
maintenance work.
repair
Attach a warning tag to the steering wheel if the
machine is defective.
Repairs must only be performed by qualified persons
who have been instructed for this purpose. Use our
repair instructions.
Exhaust gases are highly dangerous! Always ensure an
adequate supply of fresh air when starting in closed
rooms!
test
Depending on the type of application and the operating
conditions vibratory equipment has to be examined
by a specialist whenever required, but at least once
every year.
4-2012