Adjusting the parking brake
have adjustment work on the brake
performed by a specialist! Always
adjust both sides�
Secure the machine with chocks against
•
unintentional rolling.
Start the diesel engine to release the brake.
•
Fig. 167
Unlock the travel lever (Fig. 167) by pushing it to
•
the left, but do not actuate it to position "I" or "II".
The parking brake is released
Fig. 168
Unscrew the locking plate 2 (Fig. 168).
•
Turn the square (1) in anti-clockwise direction
•
against the end stop.
4-2012
MAINTENANCE
Fig. 169
To adjust the clearance turn the square 1
•
(Fig. 169) three revolutions back in clockwise
direction.
Screw the locking plate back on.
•
Pull the plug off the brake valve and try to drive.
•
The machine must be braked.
•
Section 5
5-47