Thermador Pro Grand PRD304EG Service Manual page 86

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
6. Remove and retain the four screws on the bottom cover that
secure it to the brackets on the bake element tray, and then
remove the bottom cover (see Figure 173 and Figure 176).
Figure 173: Bottom Cover
1 Screw locations (4) on bottom cover
Figure 174: Bake Element Tray
Figure 175: Element
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
7. Remove and retain the screws holding the ends of the element
onto the bake element tray (see Figure 176).
Figure 176: Bake Element Tray with Element Installed
1 Brackets (4)
2 Element
3 Ends of element with screws attached to bake
element tray
8. Pull out the element from the bake element tray.
9. Replace the element if needed.
Page 87 of 95