Thermador Pro Grand PRD304EG Service Manual page 66

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
Figure 128: Control Panel Removed (Attached to Bullnose)
1 Control Panel (shown with some knobs removed)
2 Bullnose
Figure 129: Removing a Bracket
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
Figure 130: Bracket (Shown Removed)
14. At the back side of the control panel and bullnose, remove and
retain the screws that secure the bullnose onto the control panel.
15. Pull the bullnose off of the control panel, and replace either or
both of these parts if needed.
16. When installing, it may be easier to affix the brackets to the
bullnose and control panel by placing a piece of double-sided tape
on the bracket. This enables you to have the brackets affixed so
they don't fall out when positioning the control panel / bullnose on
the range (see Figure 131).
Figure 131: Bracket (Shown with Tape Attached)
Page 67 of 95