Thermador Pro Grand PRD304EG Service Manual page 64

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
Figure 123: Locations to Remove Knobs and Manifold Support
Bracket Screws
1 Location attached to manifold support bracket
2 Location attached to manifold support bracket
5. Unscrew and remove the bezels for the oven lamp switches.
6. At the bezels on the control panel, remove and retain the screws
that connect to the two manifold support brackets (see
Figure 123).
7. At the bezels on the control panel, remove the bezel screws and
bezels that connect to the following components: five-position
oven function selector, three-position oven function selector,
griddle/grill control(s), oven temperature select switch(es).
8. Use a swivel head driver or an open end wrench to remove and
retain the three nuts with lockwashers from both sides of the
range (see Figure 124).
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
Figure 124: Three Nuts / Lockwashers (Right Side of Range Shown)
9. Remove and retain the screw at the right and left side panels
(see Figure 125).
Figure 125: Removing Screws at Sides
1 Screws (1 per side) to remove at right and left sides
Page 65 of 95