Thermador Pro Grand PRD304EG Service Manual page 79

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
Figure 153: Front Cover
1 Screw locations (4) securing front cover
8. Remove and retain the three screws securing the convection
element onto the reflector cover shield, and then remove the
convection element (see Figure 154).
9. Wearing gloves, remove the nut, and then remove the convection
fan. Retain the shim ring if it falls out when removing the fan
(see Figure 155).
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
Figure 154: Convection Element
1 Wire connector terminals (2)
2 Screw locations (2)
3 Screw location (1)
Figure 155: Fan, Nut, Shim Ring and Washer
1 Shim ring and washer
2 Fan
3 Nut
Page 80 of 95