Thermador Pro Grand PRD304EG Service Manual page 83

Service Manual for Thermador Pro Grand Dual Fuel Ranges:
1. Follow all safety precautions and steps in Preparing the Range for
Servicing, page 21.
2. Remove all trays from the oven.
3. Remove oven doors (see Oven Door Removal, Installation,
page 77).
4. Remove the backguard (see Backguard and Island Trim Removal
and Replacement, page 68).
5. Remove the back panel (see Back Panel Removal and
Replacement, page 69).
6. From the back of the range at the portals for the broil element
wires, use needle nose pliers to detach the broil element wire
connectors.
7. From inside the oven cavity, remove and retain the two screws
securing the broil element to the oven cavity (see Figure 167).
Figure 167: Element Secured to Oven Cavity
1 Screws (2) securing element to oven cavity
58300000157422_ARA_EN_A
PRD304EG, PRD364EDG, PRD364EDPG, PRD364ELG, PRD366EG, PRD366EPG, PRD484ECG, PRD484EEG, PRD486EDG, PRD486EDPG, PRD486ELG
8. Remove and retain the four screws securing the front-facing
element bracket onto the reflector plate (see Figure 168).
Figure 168: Front Element Bracket Secured to Reflector Plate
1 Screws (4) securing front element bracket to
reflector plate
Page 84 of 95