Reset Trill; Timer Lsp-Max-Age - HP 6125XLG Command Reference Manual

Examples
# Enable multicast ECMP.
<Sysname> system-view
[Sysname] trill
[Sysname-trill] multicast-ecmp enable

reset trill

Use reset trill to clear dynamic running statistics of the TRILL process.
Syntax
reset trill
Views
User view
Predefined user roles
network-admin
Examples
# Clear dynamic running statistics of the TRILL process.
<Sysname> reset trill

timer lsp-max-age

Use timer lsp-max-age to configure the maximum age of LSPs.
Use undo timer lsp-max-age to restore the default.
Syntax
timer lsp-max-age time
undo timer lsp-max-age
Default
The LSP maximum age is 1200 seconds.
Views
TRILL view
Predefined user roles
network-admin
Parameters
time: Specifies the LSP maximum age, which is in the range of 3 to 65535 seconds.
Usage guidelines
An LSP originated by an RB uses the maximum age as the remaining lifetime. When the remaining
lifetime of an LSP in the LSDB is 0 seconds, the RB removes the LSP's content, keeps the LSP's digest, and
purges the LSP from the network by advertising the LSP that has the remaining lifetime set to 0.
19