Information List; Types Of Commands; Functional Description - Siemens SIPROTEC 4 7SD80 Manual

Functions
2.18 Breaker Control
2.18.1.2

Information List

No. Information
- 52Breaker
- 52Breaker
- Disc.Swit.
- Disc.Swit.
- GndSwit.
- GndSwit.
- 52 Open
- 52 Close
- Disc.Open
- Disc.Close
- GndSw Open
- GndSw Cl.
- Q2 Op/Cl
- Q2 Op/Cl
- Q9 Op/Cl
- Q9 Op/Cl
- Fan ON/OFF
- Fan ON/OFF
31000 Q0 OpCnt=
31001 Q1 OpCnt=
31002 Q2 OpCnt=
31008 Q8 OpCnt=
31009 Q9 OpCnt=

Types of Commands

2.18.2
In conjunction with the power system control several command types can be distinguished for the device:
2.18.2.1

Functional Description

Commands to the Process
These are all commands that are directly output to the switchgear to change their process state:
•
Switching commands for controlling the circuit breakers (not synchronized), disconnectors and ground
electrodes
•
Step commands, e.g. raising and lowering transformer LTCs
•
Set-point commands with configurable time settings, e.g. to control Petersen coils
Internal / Pseudo Commands
They do not directly operate binary outputs. They serve to initiate internal functions, simulate changes of
state, or to acknowledge changes of state.
194
Type of Comments
Informa-
tion
CF_D12 52 Breaker
DP 52 Breaker
CF_D2 Disconnect Switch
DP Disconnect Switch
CF_D2 Ground Switch
DP Ground Switch
IntSP Interlocking: 52 Open
IntSP Interlocking: 52 Close
IntSP Interlocking: Disconnect switch Open
IntSP Interlocking: Disconnect switch Close
IntSP Interlocking: Ground switch Open
IntSP Interlocking: Ground switch Close
CF_D2 Q2 Open/Close
DP Q2 Open/Close
CF_D2 Q9 Open/Close
DP Q9 Open/Close
CF_D2 Fan ON/OFF
DP Fan ON/OFF
VI Q0 operationcounter=
VI Q1 operationcounter=
VI Q2 operationcounter=
VI Q8 operationcounter=
VI Q9 operationcounter=
SIPROTEC 4, 7SD80, Manual
E50417-G1100-C474-A2, Edition 02.2018