Transmission Of Binary Information And Commands - Siemens SIPROTEC 4 7SD80 Manual

4.14

Transmission of Binary Information and Commands

Remote Indications
Number of possible remote indications
The operating times depend on the communication speed.
The following data require a transmission rate of 512 kbit/s for the optical fiber protection interface.
The operating times refer to the entire signal path from entry via binary inputs until output of commands via output
relays.
Operating times, total approx.
Dropout times, total approx.
SIPROTEC 4, 7SD80, Manual
E50417-G1100-C474-A2, Edition 02.2018
4.14 Transmission of Binary Information and Commands
typical
typical
Technical Data
16
20 ms ± 5 ms
15 ms
283