Emerson Micro Motion 5700 Installation Manual page 42

Using the display controls
May 2019
42
Important
When using the arrow keys, you must first activate the optical switch then release
the same switch by removing your finger from the glass to move up, down, right,
left or to make a selection. To enable auto-scroll when navigating up or down,
activate the appropriate switch and continue to hold for one second. Release the
switch when the desired selection is highlighted.
Figure 8-2: Example 1: Active arrow indicators on the transmitter display
Figure 8-3: Example 2: Active arrow indicators on the transmitter display
Micro Motion 5700 transmitters with Intrinsically Safe Outputs
Installation Manual
MMI-20039473