Mounting and sensor wiring
May 2019
3. Gently set the junction box into its new position, confirming that the position is
4. Replace the clamp in its original position and tighten the cap screw. Torque to 28 in
22
Figure 3-14: Rotation of the sensor wiring junction box
locked.
lbf (3.16 N m) to 30 in lbf (3.39 N m).
Figure 3-15: Re-attachment of the clamp
Micro Motion 5700 transmitters with Intrinsically Safe Outputs
Installation Manual
MMI-20039473