Chattanooga Revolution Wireless Service Manual page 36

DEVICE ISSUES
Blinks red – Not Paired
When the LED blinks red, the module is not paired to the remote control.
Problem
The LED blinks red
Blinks Orange – Stimulation
The LED of the module blinks orange during an electrostimulation session.
•
However, if the LED blinks orange but the module is not in stimulation session > replace the module.
Red – Error module
A constant red LED indicates a module error.
Problem
The LED is constantly
red
Possible cause
The module not paired
Possible cause
Module error
Solution
•
Follow the procedure "HOW TO PAIR A MODULE" in the
section above.
Solution
•
Make sure the module is charged.
•
Try to re-start the remote control and the modules.
• Try to re-pair the module.
•
If despite this the LED is still red > replace the module.
35