Motorola MVME2300 Series Installation And Use Manual page 102

Modifying the Environment
6
6-8
ROM Boot at power-up only [Y/N] = Y?
ROMboot is attempted at power-up only. (Default)
Y
ROMboot is attempted at any reset.
N
ROM Boot Enable search of VMEbus [Y/N] = N?
VMEbus address space, in addition to the usual areas of
Y
memory, will be searched for a ROMboot module.
VMEbus address space will not be accessed by ROMboot.
N
(Default)
ROM Boot Abort Delay = 5?
The time in seconds that the ROMboot sequence will delay before
starting the boot. The purpose for the delay is to allow you the option
of stopping the boot by use of the
0-255 seconds. (Default = 5 seconds)
ROM Boot Direct Starting Address = FFF00000?
The first location tested when PPCBug searches for a ROMboot
module. (Default = $FFF00000)
ROM Boot Direct Ending Address = FFFFFFFC?
The last location tested when PPCBug searches for a ROMboot
module. (Default = $FFFFFFFC)
Network Auto Boot Enable [Y/N] = N?
The Network Auto Boot (NETboot) function is enabled.
Y
The NETboot function is disabled. (Default)
N
Network Auto Boot at power-up only [Y/N] = N?
NETboot is attempted at power-up reset only.
Y
NETboot is attempted at any reset. (Default)
N
key. The time value is from
BREAK
Computer Group Literature Center Web Site