Omron CK3M Series User Manual page 38

1 Introduction to Motion Controllers
No. Step
7 Preparation for Creation of a new
setting the Mo- project
tion Controller
Initialization of the
Controller
8 Settings of the Motor settings
Motion Control-
ler operation
Programming
9 Transferring project data and check-
ing the operation
*1. Perform settings for the CK3M-CPU111/CPU121 only.
1-6
Description
Connect the computer with the Support
Software installed to the Motion Control-
ler, and then start Power PMAC IDE and
create a new project.
Use Power PMAC IDE to initialize the Mo-
tion Controller.
Use Power PMAC IDE to set the motor
operations for the Motion Controller.
Create user programs on Power PMAC
IDE.
Transfer the created project data and
check that operations work as expected.
CK3M-series Programmable Multi-Axis Controller User's Manual Hardware (O036)
Reference
Refer to Power PMAC IDE User
Manual (Cat. No. O016) for de-
tails.
Refer to Power PMAC IDE User
Manual (Cat. No. O016) for de-
tails.
Refer to Power PMAC IDE User
Manual (Cat. No. O016) for de-
tails.
Refer to Power PMAC User's
Manual (Cat. No. O014) and
Power PMAC Software
Reference Manual (Cat. No.
O015) for details.
Refer to Power PMAC IDE User
Manual (Cat. No. O016) for de-
tails.