Table of Contents
Advertisement
HAMlab, Release 1.0
Danger: FUSE CURRENT RATING SHOULD NOT BE HIGHER THAN 3.15A AMPS! FAILURE TO PROP-
ERLY USE THIS SAFETY DEVICE COULD RESULT IN DAMAGE TO YOUR RADIO, POWER SUPPLY,
OR CREATE A FIRE RISK.
Chassis ground
This is a thumbscrew for attaching an earth ground to the chassis of the radio. Grounding is the most important safety
enhancement you can make to your shack. Always ground the HAMlab to your station RF ground using high quality
wiring with the length being as short as possible. Braided wire is considered the best for ground applications. Your
station ground should be a common point where all grounds come together. You will likely be using a PC and a DC
power source so be sure to ground these devices together as well.
AUDIO
Audio USB connector USB 2.0 Cable - A-Male to Mini-B must be used to connect HAMlab audio sound card with
the PC in order to be able to use Phone, MIC and speaker connector for voice communication.
Speaker connector 1/8" TRS stereo connector can be used to connect stereo powered computer speakers.
90
Chapter 4. HAMlab 80-10 10W Specifications
Advertisement
Table of Contents
